Tech • AI • Robotics • Game

ENFR

New Tesla Giga Press 50,000 Tons Destroys the Entire EV Industry

8/10
TeslaTESLA CAR WORLDNovember 18, 2026 at 11:30 AM12:42
Audio player

⏱ ≈ 3 min read · 13-min video — 10 min saved

TL;DR

Tesla is pushing giga casting to a new scale at Giga Texas, aiming to use a proposed 50,000-ton Gigapress to cut parts, labor and cycle times as it races to regain momentum in the global EV market.

KEY POINTS

A bigger Gigapress strategy

Tesla already uses large casting machines across several factories, but its latest manufacturing push centers on a fourth-generation Gigapress designed for next-generation vehicles, including the planned Cybercab. The company says the new line can support output fast enough for a vehicle to leave the assembly line in under 10 seconds, a pace intended to support production in the millions.

From robots to casting-heavy production

At Giga Texas, which builds the Model Y, Cybercab and Cybertruck, Tesla has reportedly reduced the number of robotic arms on some lines by about half from a previous base of more than 1,000. The shift reflects a broader move away from complex welding-heavy assembly toward larger one-piece structural castings that reduce manual handling and the number of intermediate steps.

How giga casting changed vehicle structure

The idea behind the Gigapress is to replace dozens of smaller stamped and welded components with a single large aluminum casting. That cuts joints, lowers weight, increases rigidity and simplifies the body structure, giving Tesla a manufacturing advantage by reducing parts count, tooling complexity and assembly time.

Origins with IDRA

During development of the Model Y, Tesla sought a machine capable of making structural castings on a scale that did not yet exist in mainstream auto production. The breakthrough came from IDRA, an Italian maker of high-pressure die-casting equipment, whose large-format press became the basis for what is now widely known as the Gigapress.

How the process works

Aluminum alloy is melted in a furnace at about 850°C, then transferred to a holding furnace kept between 750°C and 850°C to maintain a stable casting temperature. The molten metal is injected at high pressure into a steel mold, cooled into shape, then extracted, trimmed and inspected before moving to final assembly. Injection speed is critical: too fast can trap air and create voids, too slow can cause premature cooling and incomplete filling.

Purification and mold preparation

Tesla’s process uses a dual-furnace setup, with a gas-fired melting furnace and an electrically heated holding furnace. Nitrogen is used to limit oxidation, while argon degassing and a silicon carbide filter remove contaminants, including particles above 25 microns. Before each cycle, a robotic arm sprays roughly 35 ml of soybean oil onto the mold surface, and the injection piston receives about 8 ml of lubricant.

Fast cycles and hot parts

Once injected, the casting solidifies in the mold and is ejected at nearly 400°C. It is then rapidly cooled to around 50°C, while the mold itself is brought to about 185°C and cleaned for the next run. With the process synchronized, another cycle can begin in roughly 1 to 2 minutes, and trimmed aluminum is recycled back into the furnace.

Why 50,000 tons matters

The proposed 50,000-ton machine would use the same basic die-casting principle as Tesla’s existing 6,000-ton and 9,000-ton presses, but at far greater scale. The main challenge is clamping force: without enough pressure holding the mold shut, molten aluminum could force the mold halves apart and ruin the part. Tesla’s larger press is intended to cast multiple vehicle frames in a single cycle, with claims that it could handle structures for up to five vehicles at once.

A new factory model and rising competition

Tesla argues that larger castings can make auto plants operate more like consumer-electronics factories: highly automated, compact and optimized for throughput. The design impact is already significant, with reports that major structural components fell from about 200 in the Model Y to around 80 in the Cybercab. Rivals are moving in the same direction, including General Motors, Hyundai, Volvo, Zeekr and XPeng, with XPeng already investing in a 16,000-ton casting machine.

CONCLUSION

Tesla’s casting strategy is no longer just a tooling upgrade but a broader attempt to redesign vehicle production around fewer parts, faster cycles and heavier automation. If a 50,000-ton Gigapress becomes practical at scale, it could reshape both EV manufacturing economics and factory design across the auto industry.

Ask a question

More from Tesla